Why Choose Moonwalk USA?

We carries the highest quality, most durable inflatables at a reasonable price. With many durability features built in, our bouncers are all designed for both longevity and safety, so you can be sure that you are getting the most out of what you pay. Our new units all include a one year warranty from issues resulting from workmanship. 

All of our inflatables are fire retardant and lead free, and meet or exceed ASTM and CPSIA standards.

A number of our safety and durability features include:

Finger-Proof Netting prevents injury to players' fingers. Finger Proof Netting is finer compared to standard netting and will prevent players' fingers from getting caught and stuck in the netting of the bounce houses. 

 

Double-Layered Material sewn onto high stress areas such as entrances, pop-ups, and high-wear areas make units more durable and safe. Double-layered material provides additional durability and longevity to our units by distributing stresses onto two layers of material instead of the usual single layer.

 

Waterlogged inflatables can develop mildew and other problems quickly. On all our water units, a U-Shaped Liner prevents water leakage into the liners. Water drain holes and water release holes are also standard on all our water units to make water drainage easier and to prevent any lingering water from building up inside the unit.

 

Heat-Sealed Seams on water units seals pinholes in the seams that may leak water. Heat-sealing creates a water-resistant barrier on the seam that repells water to prolong the life of your water unit, making it more durable and reliable. 

 

Our unique Alligator Mouth stitching technique eliminates the high stress point where the wall meets the floor. It is also used to reinforce other high stress areas such as at entrances and exits. Our unique stitching pattern prevents stress from concentrating in one partcular area, making the units more durable and reliable for longer.

 

Double, Triple or Six-Way Box Stitching on all units ensure that our units will be durable and will last. Multiple layers of stitiching enhances the durability of the inflatable by reducing the chance of seam failures and tearing. Seams on high traffic areas are then reinforced with nylon strips or webbing to provide even greater strength.

All units sold are stitched with heavy-duty, water resistant, #207 nylon thread to minimize the chances of seam failure due to wear and tear and waterlogging, particularly on water units. 

 

Commercial Quality

We only carry commercial grade bounce houses, slides, obstacle courses, interactive games, and other inflatable products. All the products are crafted for maximum durability, built with double, triple and quadruple stitching, along with reinforcement at all important stress points. All products are carefully engineered to make sure that sufficient amount of air is distributed to all sections of the unit. We use only the finest quality, heavy duty, Light N Strong reinforced vinyl, mesh netting and extra strength thread. Commercial quality materials result in longer life and higher profitability.


Fast Shipping

All orders received before noon will be shipped the same day or the next day. Our shipping department will contact you before shipping. Both Standard Shipping and Priority Shipping are to the address with forklift or loading dock. There is an option to add Liftgate on Delivery with additional cost.


Light n StrongTM

For commercial grade inflatables, the heavy weight is always a challenge for one-person rental companies. As an industry-leading supplier, eBouncers first developed this Light n StrongTM vinyl material exclusively for commercial inflatable bounce houses. It is as strong as traditional 18 oz vinyl but reduced over 20% overall weight vs traditional vinyl material.



Kodiak-1.0HP

Kodiak-1.0HP

  |   Write a review

Product Code: A-108

Product Name: Kodiak-1.0HP

Approx. Dimensions:

Length Width Height Weight
17 in 13 in 17 in 33 lbs

In Stock

$189.00
$159.00

In Stock

Shipping calculated at checkout.

A-108 Kodiak-1.0HP

Safer, Stronger, and Lighter TM          

Specification Information

PRODUCT CODE: A-108
PRODUCT NAME: Kodiak-1.0HP
INFLATED DIMENSION: L X W X H
UNIT WEIGHT:
DESCRIPTION: B-Air Kodiak 1.0HP Blower

The New 1HP Kodiak Blower (#KP-1) from B-Air is the latest in the efficiency of amps and space usage in order to obtain the highest possible static pressure and CFM.

The Kodiak creates remarkable 1170 CFM with 8.8" of static pressure at a low 7.0 amp draw which comes in real handy with today’s larger and older Inflatables that are being used in limited residential power supply.

In addition, the Kodiak has a reverse air louver assembly outlet a 25ft cords and stackable capabilities. The Kodiak is light at 33 lbs and easy to carry with it’s built in handle.

Material:
 
Safety:

Features:

  • 1.0HP
  • Powerful 1170 CFM
  • Exclusively Designed Fan for Maximum CFM and Low Amp Draw
  • 8.8 inches of Static Pressure
  • Low 7.0 amp draw with back pressure
  • Quietest in its Class
  • Stackable
  • 25 Ft Cord
  • Toggle Switch
  • Reverse Air Louvers
  • 33 LBS
  • Easy to Carry Handle
  • 1 Year Warranty / 5 Year on Housing provided by the manufacturer(B-Air)

    •  


    Capacity:

    Coming Soon ...

    Your Purchase Includes:

    One Kodiak 1.0HP Blower